The
FRENZEL FM - 5E11 "Super Deluxe Vibrolux" is the newest version of
our classic open chassis FRENZEL FM - 5E3 "Deluxe Plus" which has rave reviews from all over
the world. At the request of a lot of players we have added the vintage 5E11 Tremolo to it, plus it has all the features
of the Super Delux Plus which include the Hammond Hi-Fi output
trannie, the Effects Loop, and the Cathode/Fixed bias selector switch and increased
power to 40 watts! (A lower 25 power version still available if you do not need the extra power) This amp will produce tones you have never heard before! Think of it as a 5E11
on steroids! See features list below.
FEATURES:
Input Jacks
isolated from chassis for low noise, eddy currents, and hum.
Laser Etched Faceplate
Classic Knurled Knobs, Toggle
Switches and Jewel Pilot Light
Chassis Dimensions - 17" x 10"
x 2"
Weight: 15 lbs.
DC on filaments for
low 60 hz hum.
Star ground
system to reduce induced current chassis noise.
Normal (Type
F) Bright (Type M) inputs with separate preamps and Gain controls for the unique smooth Fender 5F6 warm
tones or the Marshall Plexi SLP great high mid tones....or you can use an AB-Y switch and create your own distinct tones.
Classic 60's JTM45
- Bassman 5F6 style 3-BAND TONE STACK for extended flexibility in shaping your tone.
MASTER level
control so you can crank the GAIN's up and overdrive the preamp without overdriving the output tubes.
Classic Type
5F6A Style Presence control .
Unique NNFB
"Edge" switch on the PRESENCE control that transforms the power amp section into a No-Negative-FeedBack style amp for more
open, less compressed tones.
Class AB
fixed biased 6L6's in the output in place of the original Deluxe cathode biased 6V6's to give you more power and headroom.
Preamp and
driver tubes are 12AX7 EH's known for low noise and linearity. You may also use 12AT7's or 12AU7's for different
tones and overdrive.
Classic 60's
style insertion type Serial Effects Loop with Return Jack (Power Amp In), Send Jack (Preamp Out), and Send Level Control.
Tremolo Speed and Depth Controls
Footswitch pedal for Tremolo
Dual Speaker Jacks
A Classic Hammond Hi-Fi output
transformer for extended low frequency performance with 4 - 8 - 16 ohm outputs selectable by a rotary switch.
Cathode / Fixed Bias Selector
Switch - Allows you to choose cathode bias for the classic "compressed blues" sound, or fixed bias for "dynamic
rock" sounds.
Power Output:
40 watts RMS (25 Watt version also available)
5U4 rectifier,
you can sub 5Y3, 5AR4, or Solid State Plug in for different amounts of sag.
Extra long
(10') three prong grounded power cord.
STANDBY switch
to turn off the plate voltage during warm-up.
Rock
solid point-to-point hand wiring using only the best of parts...low noise tubular polypropylenes
caps, metal film resistors, ceramic sockets, switchcraft jacks...etc.
Sweet vintage
clean to classic overdrive tones with three different types of distortion depending on whether you are overdriving the preamp,
output... or both!
Tube compliment:
The amp comes with 3 - 12AX7, 2 - 6L6, 1 - 5U4, but you can substitute 12AT7's or 12AU7's in the preamp and driver
for different tones and overdrive sounds. You can also substitute 5881's, KT77's, KT88's, 6550's, or EL34's and KT66's
(CLass B operation) in the output stage for different sounds.
FRONT
PANEL:
- NORMAL
INPUT
- BRIGHT INPUT
- NORMAL GAIN
- BRIGHT GAIN
- BASS
- MIDDLE
- TREBLE
-
MASTER
- PRESENCE
with EDGE PULL SWITCH
- SPEED
- DEPTH
- STANDBY
POWER SWITCH
- PILOT LIGHT
- ON OFF POWER SWITCH
REAR
PANEL:
- POWER
CORD
- FUSE
- TREMOLO FOOTSWITCH JACK
- CATHODE/FIXED BIAS SELECTOR
SWITCH
- EFFECTS LOOP SEND LEVEL CONTROL
- EFFECTS LOOP SEND JACK
- EFFECTS LOOP RETURN JACK
- DUAL
SPEAKER OUT JACKS
- SPEAKER 4 - 8 -16 IMPEDANCE
SWITCH
PRICE: $1095.00 SPECIAL SALE PRICE $895.00
UPGRADE
OPTIONS:
1. 25
WATT VERSION - The amp is also available with 25 watts output. No charge for this option.
2. QUAD OF 6V6'S
- Four 6V6's in place of the pair of 6L6's for the smooth warm 6V6 tones. Includes 1/2 power switch that turns of
two off the 6V6's. Add $120.00
3. 240 VOLT
POWER TRANSFORMER - for operation outside the USA. Add $40.00 .
4. STEEL CAGE - classic 60's perforated steel cage with handle. Add $195.00
5. EDGE FOOTSWITCH - adds
jack to rear panel for footswitch control on the NNFB EDGE switch. Includes classic heavy duty footswitch with LED. Add
$100.00
6. RACKMOUNT ROAD CASE -
heavy duty reinforced plastic military style road case with built in 19" rack. Front and rear covers for total protection
during travel. Add $345.00
